Robert,

On Tue, Jun 5, 2018 at 9:28 PM, Robert Raszuk <[email protected]> wrote:

> ​Muthu,​
>
>
>> ​How is the measurement interval and filter coefficients described in the
>> draft related to dissemination?​
>>
>
> ​It is directly related. If you see the title of the section is:
> "Announcement Thresholds and Filters"​
>
> So measurement interval does not intend to describe how often you actually
> measure ... it describes a time window where you report the value (which
> could consist of many measurements actually taken).
>

​Are you saying measurement interval is a misnomer? The draft clearly
distinguishes measurement interval from announcement interval:

​   Additionally, the default measurement interval for all sub-TLVs
   SHOULD be 30 seconds.

   Announcements MUST also be able to be throttled using configurable
   inter-update throttle timers.  The minimum announcement periodicity
   is 1 announcement per second.  The default value SHOULD be set to 120
   seconds.​

Yet, it claims measurements are outside its scope..


> We intentionally left out this part that does not belong to the igp
>>> protocol machinery.
>>>
>>
>> ​Which of the functionalities described in sections 5, 6, 7 of the draft
>> belong to the IGP protocol machinery?
>>
>
>
> ​What draft are you talking about ? I was under impression that we are
> discussing RFCs here.
>

​Well, both -:) I am referring to draft-ginsberg-lsr-isis-rfc7810bis and I
believe there is a chance to improve some text in RFC7810..

Regards,
Muthu


>
>
> ​All functionality from sections 5-7 aim to provide machinery to control
> stability of protocol operation. It is one how you measure and this is not
> part of the RFCs. and completely different what and how you advertised
> derived values from those gathered by your measurements. Now keeping in
> mind that you do not advertise when you measure but only when you are
> allowed by protocol rules it should be easy to see the point which Stefano
> made above.
>
> ​Thx,
> R.
>
>
_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr

Reply via email to