Tim, What version of LTSP are you using ?
The X_MOUSE_DEVICE in the lts.conf file is the correct place to specify the mouse device. /dev/ttyS0 should work for you. The other setting you need is the X_MOUSE_PROTOCOL. The value of that depends on what kind of mouse you have. You might try 'Microsoft' or 'Logitech'. if that still doesn't work, then send us a copy of your lts.conf file. Hope that helps, Jim McQuillan [EMAIL PROTECTED] Timothy Legge wrote: >Hi > >I have a workstation that does not recognize the serial mouse. The only way >I can start X is to specify a PS/2 mouse (that the motherboard does not have >a port for but the bios would allow). I have tried /dev/ttyS0 and >/dev/ttyS1 in both XF86Config and lts.conf to no avail. Redhat 5.2 runs >fine on that PC and X can find the mouse. The original XF86Config came form >the 5.2 RH and I am usinfg the S3 X server. > >Any ideas? > >Tim > > >********************************************************************************************* >This E-mail message (including attachments, if any) is intended for the use >of the individual or entity to which it is addressed and may contain >information that is privileged, proprietary, confidential and exempt from >disclosure. If you are not the intended recipient, you are notified that >any dissemination, distribution or copying of this communication is >strictly prohibited. If you have received this communication in error, >please notify the sender and erase this E-mail message immediately. > >Le pr�sent message �lectronique (y compris les pi�ces qui y sont annex�es, >le cas �ch�ant) s'addresse au destinataire indiqu� et peut contenir des >renseignements de caract�re priv� ou confidentiel. Si vous n'�tes pas le >destinataire de ce document, nous vous signalons qu'il est strictement >interdit de le diffuser, de le distribuer ou de le reproduire. Si ce message >vous a �t� transmis par erreur, veuillez en informer l'expediteur et les > upprimer imm�diatement. > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
