Hi I started using the 3.0 version, so I was not aware of its prior location. I will post the lst.conf file.
Tim -----Original Message----- From: Jim McQuillan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 12, 2001 11:25 AM To: Egan, Matt B. (Artco) Cc: Timothy Legge; Subject: Re: [Ltsp-discuss] Serial mouse with ltsp 3.0 Matt makes a good point here, but he didn't mention where the correct file is. As of LTSP 2.09, the config file for ltsp is in /opt/ltsp/i386/etc/lts.conf It's in the changelog and the new docs, but some may have missed that. Jim McQuillan [EMAIL PROTECTED] Egan, Matt B. (Artco) wrote: >Jim, Tim, I don't know if this would cause other people problems but when I >first went to ltsp 2.09xxx from 2.08 I had problems cause I was still >modifying the lts.conf in /tftpboot/lts/ltsroot/etc/ and none of my changes >had any affect on my Terminals > >So I thought I'd throw this one out cause hell it happened to me. > >Good luck > >Matt > -----Original Message----- >From: Jim McQuillan [mailto:[EMAIL PROTECTED]] >Sent: Wednesday, December 12, 2001 7:29 AM >To: Timothy Legge >Cc: [EMAIL PROTECTED] >Subject: Re: [Ltsp-discuss] Serial mouse with ltsp 3.0 > >Tim, > >What version of LTSP are you using ? > >The X_MOUSE_DEVICE in the lts.conf file is the correct place >to specify the mouse device. /dev/ttyS0 should work for you. >The other setting you need is the X_MOUSE_PROTOCOL. The >value of that depends on what kind of mouse you have. You might try >'Microsoft' or 'Logitech'. > >if that still doesn't work, then send us a copy of your lts.conf file. > >Hope that helps, > >Jim McQuillan >[EMAIL PROTECTED] > > >Timothy Legge wrote: > >>Hi >> >>I have a workstation that does not recognize the serial mouse. The only >> >way > >>I can start X is to specify a PS/2 mouse (that the motherboard does not >> >have > >>a port for but the bios would allow). I have tried /dev/ttyS0 and >>/dev/ttyS1 in both XF86Config and lts.conf to no avail. Redhat 5.2 runs >>fine on that PC and X can find the mouse. The original XF86Config came >> >form > >>the 5.2 RH and I am usinfg the S3 X server. >> >>Any ideas? >> >>Tim >> >> >>************************************************************************** * >> >****************** > >>This E-mail message (including attachments, if any) is intended for the use >>of the individual or entity to which it is addressed and may contain >>information that is privileged, proprietary, confidential and exempt from >>disclosure. If you are not the intended recipient, you are notified that >>any dissemination, distribution or copying of this communication is >>strictly prohibited. If you have received this communication in error, >>please notify the sender and erase this E-mail message immediately. >> >>Le pr�sent message �lectronique (y compris les pi�ces qui y sont annex�es, >>le cas �ch�ant) s'addresse au destinataire indiqu� et peut contenir des >>renseignements de caract�re priv� ou confidentiel. Si vous n'�tes pas le >>destinataire de ce document, nous vous signalons qu'il est strictement >>interdit de le diffuser, de le distribuer ou de le reproduire. Si ce >> >message > >>vous a �t� transmis par erreur, veuillez en informer l'expediteur et les >>upprimer imm�diatement. >> >>_____________________________________________________________________ >>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>For additional LTSP help, try #ltsp channel on irc.openprojects.net >> > > > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > ********************************************************************************************* This E-mail message (including attachments, if any) is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, proprietary, confidential and exempt from disclosure. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender and erase this E-mail message immediately. Le pr�sent message �lectronique (y compris les pi�ces qui y sont annex�es, le cas �ch�ant) s'addresse au destinataire indiqu� et peut contenir des renseignements de caract�re priv� ou confidentiel. Si vous n'�tes pas le destinataire de ce document, nous vous signalons qu'il est strictement interdit de le diffuser, de le distribuer ou de le reproduire. Si ce message vous a �t� transmis par erreur, veuillez en informer l'expediteur et les upprimer imm�diatement. _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
