Matt makes a good point here, but he didn't mention where the correct file is.
As of LTSP 2.09, the config file for ltsp is in /opt/ltsp/i386/etc/lts.conf It's in the changelog and the new docs, but some may have missed that. Jim McQuillan [EMAIL PROTECTED] Egan, Matt B. (Artco) wrote: >Jim, Tim, I don't know if this would cause other people problems but when I >first went to ltsp 2.09xxx from 2.08 I had problems cause I was still >modifying the lts.conf in /tftpboot/lts/ltsroot/etc/ and none of my changes >had any affect on my Terminals > >So I thought I'd throw this one out cause hell it happened to me. > >Good luck > >Matt > -----Original Message----- >From: Jim McQuillan [mailto:[EMAIL PROTECTED]] >Sent: Wednesday, December 12, 2001 7:29 AM >To: Timothy Legge >Cc: [EMAIL PROTECTED] >Subject: Re: [Ltsp-discuss] Serial mouse with ltsp 3.0 > >Tim, > >What version of LTSP are you using ? > >The X_MOUSE_DEVICE in the lts.conf file is the correct place >to specify the mouse device. /dev/ttyS0 should work for you. >The other setting you need is the X_MOUSE_PROTOCOL. The >value of that depends on what kind of mouse you have. You might try >'Microsoft' or 'Logitech'. > >if that still doesn't work, then send us a copy of your lts.conf file. > >Hope that helps, > >Jim McQuillan >[EMAIL PROTECTED] > > >Timothy Legge wrote: > >>Hi >> >>I have a workstation that does not recognize the serial mouse. The only >> >way > >>I can start X is to specify a PS/2 mouse (that the motherboard does not >> >have > >>a port for but the bios would allow). I have tried /dev/ttyS0 and >>/dev/ttyS1 in both XF86Config and lts.conf to no avail. Redhat 5.2 runs >>fine on that PC and X can find the mouse. The original XF86Config came >> >form > >>the 5.2 RH and I am usinfg the S3 X server. >> >>Any ideas? >> >>Tim >> >> >>*************************************************************************** >> >****************** > >>This E-mail message (including attachments, if any) is intended for the use >>of the individual or entity to which it is addressed and may contain >>information that is privileged, proprietary, confidential and exempt from >>disclosure. If you are not the intended recipient, you are notified that >>any dissemination, distribution or copying of this communication is >>strictly prohibited. If you have received this communication in error, >>please notify the sender and erase this E-mail message immediately. >> >>Le pr�sent message �lectronique (y compris les pi�ces qui y sont annex�es, >>le cas �ch�ant) s'addresse au destinataire indiqu� et peut contenir des >>renseignements de caract�re priv� ou confidentiel. Si vous n'�tes pas le >>destinataire de ce document, nous vous signalons qu'il est strictement >>interdit de le diffuser, de le distribuer ou de le reproduire. Si ce >> >message > >>vous a �t� transmis par erreur, veuillez en informer l'expediteur et les >>upprimer imm�diatement. >> >>_____________________________________________________________________ >>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>For additional LTSP help, try #ltsp channel on irc.openprojects.net >> > > > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
