[EMAIL PROTECTED] wrote:
> Andy,
>
> Ahh, the dreaded Cirrus logic chipset.
>
> If you leave it set to 'auto', then LTSP will automatically
> try to use the either the cirrus or the cirrus_alpine driver,
> depending on the PCI device ids.
>
> Try setting XSERVER = XF86_SVGA
>
> That will cause it to use the XFree86 3.3.6 driver.
>
> You'll also need to install the ltsp_x336_svga package.
>
> The Cirrus logic chipsets have been one of the biggest
> headaches for LTSP admins. They are notoriously difficult
> to get setup properly.
>
> There are other things to try, but the best place to
> get help on this is through the #ltsp IRC channel
> at irc.openprojects.net.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
I do not know how to use IRC at all. I've installed the package you
meantion here, but that didn't do anything. I'm still getting the same
error:
fatal server error
no screens found
What do I need to look at doing?
Andy
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
