On Wed, 2004-05-19 at 09:12, Krsnendu dasa wrote:
> I have used etherboot disk for realtek 8029 card on the thin client
> computer (P100 IBMs). It has got an IP address, downloaded the kernel
> etc. When it goes to boot the xserver it fails. The message I can see on
> the screen when this happens is:-
>
> "
> (++) using config file: "/tmp/XF86Config.1"
> Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.0"
> Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.0"
> Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.0"
>
> (EE) No drivers available.
> Fatal server error: no screen.
>
> "
This is Xserver failing to get proper mode-lines for your screen. Most
likely, I am shooting in dark here without knowing full details of your
hardware, you are using a display card with less than 2mb RAM. As
general rule cards with less than 1mb will show 640x480 resolution only
and less than 2mb 800x600. I am assuming this as you mention old P1-100
machine. You need to set up proper mode resolution in lts.conf file for
this workstation something like:
X_MODE_0 = 640x480
or even a full mode line like:
X_MODE_0 = 640x480 25.175 640 656 752 800 480 490 492 525
-hsync -vsync
Please be careful as this is one line and may appear wrapped in to two
lines due to limitation of your email reader.
--
Sudev Barar
Learning Linux
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
