On Wed, 2004-05-19 at 10:45, Sudev Barar wrote:
> On Wed, 2004-05-19 at 09:12, Krsnendu dasa wrote:
> > I have used etherboot disk for realtek 8029 card on the thin client
> > computer (P100 IBMs). It has got an IP address, downloaded the kernel
> > etc. When it goes to boot the xserver it fails. The message I can see on
> > the screen when this happens is:-
> >
> > "
> > (++) using config file: "/tmp/XF86Config.1"
> > Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.0"
> > Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.0"
> > Skipping "/usr/x11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.0"
> >
> > (EE) No drivers available.
> > Fatal server error: no screen.
> >
> > "
>
> This is Xserver failing to get proper mode-lines for your screen. Most
OOOOpppppsssss...
Re-reading makes me wonder if the card that you are using is supported.
Look up /opt/ltsp/i386/etc/lts.conf.readme for all cards that are
supported. If your card is not found in that then my suggestion would be
to try:
XSERVER = Xvesa
in the lts.conf file for this workstation section. With mode line
suggested earlier.
--
Sudev Barar
Learning Linux
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
