On Wed, Jul 2, 2008 at 10:38 AM, Nicholas Metsovon <[EMAIL PROTECTED]> wrote: > Thank you very much for your reply. That's what I was afraid of. > > Does anyone out there have any ideas how I can go about creating an image in > SuSE that will allow etherboot clients to boot? > > Another option, of course, would be for me to install LTSP 4.2 for those > clients. I assume SuSE Kiwi-LTSP will allow me to run both concurrently, > won't it? If I have to go this route, is there anything I have to watch out > for? Also, is PulseAudio likely to work in 4.2?
Should work with a bit of dhcpd configuration. KIWI-LTSP puts all the stuff in /srv/tftpboot, keep ltsp 4.2 boot images relative to that. Cheers -J ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
