On Tue, Jul 8, 2008 at 7:13 PM, Verner Kjærsgaard <[EMAIL PROTECTED]> wrote:
>
> Hi again,
> - didn't expect such a quick answer....so in the meantime I renumbered
> my server to 10.0.0.254 and all. That DIT IT!
>
> - well, I've got another problem now, the client boots into level 3 not
> 5. The X server seems to fail. This is odd, as the client is a legacy
> IBMt ThinkPad A20M which has been running SuSE-everything and more.
We boot ltsp client in runlevel 3, LDM is started from there.
>
> On the very top of the screen I get:
>
> /sbin/configure-x.sh: line 27: 3267 Aborted LANG=C Xorg configure :1 >
> ${TEMPFILE} 2>&1
>
It is not able to configure X, try this:
cp /etc/X11/xorg.conf.install /srv/tftpboot/KIWI/xorg.conf
add the following to /srv/tftpboot/KIWI/config.default
,/KIWI/xorg.conf;/etc/X11/xorg.conf;10.0.0.254
Could you try another client if possible just to make sure the entire
setup is working properly?
Cheers
-J
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
