CyberOrg skrev:
> On Tue, Jul 8, 2008 at 7:13 PM, Verner Kjærsgaard <[EMAIL PROTECTED]> wrote:
> 
>> Hi again,
>> - didn't expect such a quick answer....so in the meantime I renumbered
>> my server to 10.0.0.254 and all. That DIT IT!
>>
>> - well, I've got another problem now, the client boots into level 3 not
>> 5. The X server seems to fail. This is odd, as the client is a legacy
>> IBMt ThinkPad A20M which has been running SuSE-everything and more.
> 
> We boot ltsp client in runlevel 3, LDM is started from there.
> 
>> On the very top of the screen I get:
>>
>> /sbin/configure-x.sh: line 27: 3267 Aborted  LANG=C Xorg configure :1 >
>> ${TEMPFILE} 2>&1
>>
> 
> It is not able to configure X, try this:
> 
> cp /etc/X11/xorg.conf.install /srv/tftpboot/KIWI/xorg.conf
> 
> add the following to /srv/tftpboot/KIWI/config.default
> 
> ,/KIWI/xorg.conf;/etc/X11/xorg.conf;10.0.0.254
> 
> Could you try another client if possible just to make sure the entire
> setup is working properly?
> 
> Cheers
> 
> -J

Just switched client (another IBM Thinkpad), same thing.
Noticed that during boot, the client says:

loading keymap: failed

Now, I'll try your x modifs, wait a sec, just done them...:

- this left my entire (client) screen flashing once a second, showing 
the console on/off.

- still it complains about the keymap "cannot find us keymap".

Any good ideas.., a log file that I can attach perhaps?


-- 
--------------------------------------------
Med venlig hilsen/best regards
Verner Kjærsgaard
Novell Certified Linux Professional 10035701
www.os-academy.dk +45 56964223

Prisbillig hotelovernatning!
Se www.bbhotels.dk
--------------------------------------------

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to