CyberOrg wrote: > On Wed, Jul 2, 2008 at 8:52 PM, CyberOrg <[EMAIL PROTECTED]> wrote: > > >>> 2. I already have a few services running on port 2000 which cannot be >>> changed due to dependencies. However, nbd-server also needs port 2000 >>> which I found that it can be changed in /etc/init.d/nbd-server. But even >>> after this change the clients do not boot and fail as they can't find >>> the image at port 2000. Doe this mean that the prebuilt image can only >>> work if 2000 port is free and nbd is listening at it. >>> >>> >> Try nbdPort=2001 kernel parameter in >> /srv/tftpboot/pxelinux.cfg/default at the end of initrd line. >> >> > > There is a "proper" KIWI way of doing this: > > in /srv/tftpboot/KIWI/config.default > > NBDROOT=10.0.0.254;2000 > > Change the port to whatever you want. > Partial success. But it still fails with "Network module : Failed to load network module !"
Pls advice. SB ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
