"I already happen to have an 8-bank PG Designs board." ... which I believe it was Steve Adolph who who supplied the missing software to get that actually working, so, thanks yet again Steve!
-- bkw On Fri, Jan 20, 2017 at 9:39 AM, Brian White <[email protected]> wrote: > I didn't order quad boards because I already happen to have an 8-bank PG > Designs board. (Well, 7 bank plus the original 1, total 8. The PGDesigns > one doesn't conflict with or displace the internal ram.) I'll probably > still do a set of quads anyway sometime. > > But I ordered a set of Rex boards and all the parts to populate them, but > still waiting for the stuff to arrive. > > My digikey parts came in just yesterday, which is all components except > the flash. The pcbs have shipped so I migh even get them today. That just > leaves the flash ram. Had to order that from another site. That should show > up any day now too. > > There are experiences already: > > The flash ram is apparently already obsolete and hard to source. > Maybe there are other equivalents that could be swapped in, and I just > don't know them. The data sheets for a part like that are a little > complicated to be sure about figuring out a substitution. I didn't even try. > Digikey didn't have it, but I got some from Verical. > > Had to guess at some values. > What voltage for the caps? I chose 16v. > What power rating for the resistors? I chose 1/4w. > > I guess no one can help the ram going obsolete. That will just always > happen rapidly forever I guess. > > -- > bkw > > > On Thu, Jan 19, 2017 at 1:10 PM, Mike Stein <[email protected]> wrote: > >> From Bitchin100: >> >> QUAD circuit board is now available on OSHPARK. You can build your own! >> Let's get any and all build information and experiences people have >> captured here... parts lists, tips etc. Can't find it; could you paste a >> link, please? >> >> And while I'm at it, is the 8K board shared anywhere? >> >> TIA, >> >> m >> > >
