Welcome to the list Andrew. TELCOM will work as a dumb terminal. However, the small serial buffer in the Model-T will get overloaded at high baud rates. HTerm, which uses RTS/CTS flow control, can run at 19200. Kurt
On Wed, Feb 20, 2019, at 11:47 AM, Andrew Kennedy wrote: > Howdy everyone, I just wanted to say hello! > > I just purchased a 102 on eBay, and I'm trying to read up on things > and get acquainted with the files on club100 and bitchin100 while I > wait for it to arrive.> > My machine should be in good condition when I get it, but I wanted to > open it up and check on the NiCd. Is there a way to tell if it's been > replaced recently or not?> > A little about myself: I'm 27, if that makes me young for this crowd, > and I live in Greensboro, NC. I built one of Glitch (of > glitchwrks.com)'s 8085 SBCs at VCF East last year, so I'm interested > in using another 8085 machine as my terminal for it.> > Am I correct in believing that TELCOM on the M102 should work as a > dumb terminal "out of the box", with a 3-wire null modem cable in > the RS-232 port? I'm going to have to wait a while before I can > purchase a REX.> > Thanks for taking the time to read, I probably won't have much to > contribute to the discussions on here but I am looking forward to > reading them :)> > - Andrew
