Where can one find HTERM? -Grimakis
On Wed, Feb 20, 2019 at 4:35 PM Mike Stein <[email protected]> wrote: > Well, that depends... if you can do XON/XOFF handshaking and have a 'real' > serial port you should be able to do 19,200bd without problems. > > But Hterm is worth looking into anyway; not only can it use hardware > handshaking, it can also go up to 38,400bd (or more) and can translate UTF > & ANSII codes. > > Have FUN!! > > ----- Original Message ----- > *From:* Kurt McCullum <[email protected]> > *To:* [email protected] > *Sent:* Wednesday, February 20, 2019 3:07 PM > *Subject:* Re: [M100] New Model T owner > > Welcome to the list Andrew. TELCOM will work as a dumb terminal. However, > the small serial buffer in the Model-T will get overloaded at high baud > rates. HTerm, which uses RTS/CTS flow control, can run at 19200. > > Kurt > > > On Wed, Feb 20, 2019, at 11:47 AM, Andrew Kennedy wrote: > > Howdy everyone, I just wanted to say hello! > > I just purchased a 102 on eBay, and I'm trying to read up on things and > get acquainted with the files on club100 and bitchin100 while I wait for it > to arrive. > > My machine should be in good condition when I get it, but I wanted to open > it up and check on the NiCd. Is there a way to tell if it's been replaced > recently or not? > > A little about myself: I'm 27, if that makes me young for this crowd, and > I live in Greensboro, NC. I built one of Glitch (of glitchwrks.com)'s > 8085 SBCs at VCF East last year, so I'm interested in using another 8085 > machine as my terminal for it. > > Am I correct in believing that TELCOM on the M102 should work as a dumb > terminal "out of the box", with a 3-wire null modem cable in the RS-232 > port? I'm going to have to wait a while before I can purchase a REX. > > Thanks for taking the time to read, I probably won't have much to > contribute to the discussions on here but I am looking forward to reading > them :) > > - Andrew > > >
