http://bitchin100.com/wiki/index.php?title=HTERM <http://bitchin100.com/wiki/index.php?title=HTERM>
> On Feb 20, 2019, at 4:41 PM, George Michael Rimakis <[email protected]> > wrote: > > Where can one find HTERM? > > -Grimakis > > On Wed, Feb 20, 2019 at 4:35 PM Mike Stein <[email protected] > <mailto:[email protected]>> wrote: > Well, that depends... if you can do XON/XOFF handshaking and have a 'real' > serial port you should be able to do 19,200bd without problems. > > But Hterm is worth looking into anyway; not only can it use hardware > handshaking, it can also go up to 38,400bd (or more) and can translate UTF & > ANSII codes. > > Have FUN!! > ----- Original Message ----- > From: Kurt McCullum <mailto:[email protected]> > To: [email protected] <mailto:[email protected]> > Sent: Wednesday, February 20, 2019 3:07 PM > Subject: Re: [M100] New Model T owner > > Welcome to the list Andrew. TELCOM will work as a dumb terminal. However, the > small serial buffer in the Model-T will get overloaded at high baud rates. > HTerm, which uses RTS/CTS flow control, can run at 19200. > > Kurt > > > On Wed, Feb 20, 2019, at 11:47 AM, Andrew Kennedy wrote: >> Howdy everyone, I just wanted to say hello! >> >> I just purchased a 102 on eBay, and I'm trying to read up on things and get >> acquainted with the files on club100 and bitchin100 while I wait for it to >> arrive. >> >> My machine should be in good condition when I get it, but I wanted to open >> it up and check on the NiCd. Is there a way to tell if it's been replaced >> recently or not? >> >> A little about myself: I'm 27, if that makes me young for this crowd, and I >> live in Greensboro, NC. I built one of Glitch (of glitchwrks.com >> <http://glitchwrks.com/>)'s 8085 SBCs at VCF East last year, so I'm >> interested in using another 8085 machine as my terminal for it. >> >> Am I correct in believing that TELCOM on the M102 should work as a dumb >> terminal "out of the box", with a 3-wire null modem cable in the RS-232 >> port? I'm going to have to wait a while before I can purchase a REX. >> >> Thanks for taking the time to read, I probably won't have much to contribute >> to the discussions on here but I am looking forward to reading them :) >> >> - Andrew >
