Thanks, indeed. I thought i might get there quicker, had hoped it  
just would find all the Printer stuff  on my Lacie, because I had   
everything set up in such a way that I printed via Airport from  
anywhere in the house, on every machine, but everything was   
channeling through the iMac, I suppose. Now I guess i have to get the  
computers confused again as to who the boss is, but not having any  
idea how long this repair  will take, I will go for the new  
adventure.  I did put the printer utility on my desktop and tried to  
add the printer - well----, you know what happened. Thanks.----- work  
for tomorrow ----- or later!!!
Marta



On Apr 12, 2006, at 6:57 PM, Profile wrote:

> Marta,
>
> It might be good to go to the manufacturer's site for the printer,  
> be it Epson, H.P., or whatever your brand.  Download the most  
> current version, then take that file and copy it to each of your  
> computers.  Do the install by clicking on the file you just put on  
> your desktop, and let it do it's thing, walking through the install.
>
> Once that is done, start the utility "Printer Setup Utility" and  
> click on the "add" button.  It will search your hard drive for the  
> type printer you indicate, such as a USB printer, or an Epson USB  
> printer, etc.   It will find the drivers you just installed, and  
> begin to fill in the form, you may have to click on the very bottom  
> line to pick the exact printer from the Epson list for instance.   
> Once you do the print driver will be installed for you to use when  
> you get ready to print.
>
> Now, do the same thing on the next computer, then the next.  Once  
> each printer has the driver installed it will print from the  
> Airport that you plugged the USB cable from the printer.....that is  
> it.  No wires going from each computer (I am assuming that each of  
> your computers has a wireless card, or is hooked to your network  
> through an ethernet cable).
>
> If this is too confusing, send me your phone number and I'll give  
> you a call.
>
> John R.
>
>
> On Apr 12, 2006, at 6:08 PM, Marta Edie wrote:
>
>> Thanks indeed, John, and Brian, you are all so wonderful. Just  
>> came back from Mactown where I left my sick iMac.
>>  I also just plugged in my Lacie, and low and behold, I can access  
>> everything now except the few things from the last two days. Now I  
>> shall try -tomorrow!! - to do this printer thing from my airport.  
>> They both sit in kissing distance from each other. Maybe it will  
>> work. Right now I am poofed from that trip to town.
>> You know, as much as I am worried about this MacDrama, in the long  
>> run I shall perhaps learn a few more tricks and get my wormish- 
>> cable-mess-up a bit straightened out and all that accumulated cat  
>> hair removed.  At least I have half of the cords
>> already unplugged. That's what you call Gl?ck im Ungl?ck.
>> And what do you mean by putting the print drivers unto my computers?
>> Marta
>>
>>
>>
>> On Apr 12, 2006, at 9:58 AM, Profile wrote:
>>
>>> Marta,
>>>
>>> If you have the printer close to the Airport you can put the USB  
>>> cable from the printer into the Airport USB port, put the print  
>>> drivers on each of your computers that you wish to print from and  
>>> now you have a network printer.
>>>
>>> In my case the Airport is hooked to the wall about 9 ft. high, so  
>>> I couldn't put a printer there, so I use the Airport express in  
>>> an electrical outlet close to the printer, do the same  
>>> configuration and now that little devise gives me a wireless  
>>> network printer.
>>>
>>> If you need any help, let me know.
>>>
>>> John R.
>>>
>>>
>>> On Apr 12, 2006, at 9:50 AM, Marta Edie wrote:
>>>
>>>> I have to take my iMac for repair.  I have always been able to  
>>>> print, I suppose,  from all my computers, apparently through my  
>>>> iMac. Now I have, it seems, difficulty accessing the printers,  
>>>> as my iMac is shut down. - In case this trouble is not resolved  
>>>> quickly with my iMac, how would I go about being able to print  
>>>> from my iBook and powerbook?
>>>> Do I need to install the software? Could I manage through my  
>>>> airport?
>>>> I have spent a couple of hours just to think the process  
>>>> through, but being of little brain like Pooh, it isn't that easy.
>>>> I get menus to fill out all kinds of places, but I don't know  
>>>> what to add . Any pointers?
>>>> Marta
>>>>
>>>>
>>>>
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://www.math.louisville.edu/pipermail/macgroup/attachments/20060412/6eacf7ee/attachment.html
 

Reply via email to