On 9/14/2016 2:41 PM, Мартин Йорданов wrote: > HI all, > > I'm trying to configure my custom Kossel mini on BBB + CRAMPS following the > instructions found on Brandon's blog > <https://designmakeshare.wordpress.com/2014/06/30/machinekit-delta-configuration-calibration/>. > > I'm unable to load the CRAMPS.lineardelta configuration in machinekit, while > I'm > still able to load the default CRAMPS config (also tested my board with this > config - everything seems OK on hardware level). > > Here is the terminal output on attempt to use lieardelta.hal: > > MACHINEKIT - 0.1 > Machine configuration directory is > '/home/debian/machinekit/configs/ARM.BeagleBone.CRAMPS' > Machine configuration file is 'CRAMPS.lineardeltakins.ini' > Starting Machinekit... > io started > halcmd loadusr io started > Could not open command file 'CRAMPS.lineardelta.hal'
This looks like a problem. Verify the file name and permissions for your HAL file. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
