It actually says revision 4. -------------------------------------------- cat /proc/cpuinfo -------------------------------------------- processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4
processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 Hardware : BCM2709 Revision : a02082 Serial : 00000000376aff9f ----------------------------------------------------------------------------------------------------------- But I get this error in /var/log/linuxcnc.log when trying to load hal_gpio: Oct 23 11:00:23 raspberrypi rtapi:0: rtapi_app_main(hal_gpio): -22 Invalid argument Oct 23 11:00:23 raspberrypi msgd:0: hal_lib:1854:rt HAL_GPIO: ERROR: board revision 5 not supported I am not worried about breaking my installation. I would like to try and use a buildroot system eventually. Currently just testing. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
