On 24/10/16 14:24, John Erlandsson
wrote:
It actually says revision 4.
-------------------------------------------- cat
/proc/cpuinfo --------------------------------------------
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon vfpv3
tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon vfpv3
tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon vfpv3
tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon vfpv3
tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2709
Revision : a02082
I was rather suspicious about this revision number, or should I
say the one which has already been committed.
However it looks like both are valid and relate to the rpi v3 B
http://elinux.org/RPi_HardwareHistory
Just depends on the manufacturer
Leave it with me for a while and I will set up both revisions as
valid for cpu revision 4 and advise when there is
a package containing it to test
https://github.com/machinekit/machinekit/pull/1085
refers
Will take 30 mins to test build, then needs someone to merge it
and 2 - 3 hours for package builds to complete.
Probably best to check the repo tomorrow for the new built
packages.
They are just starting to come through
Seem to recall that the raspbian package is the last to be built
You should be looking for machinekit-xenomai_0.1.1477321845-1mk.travis.master.git7495c33a~1raspbian_armhf.deb
in deb.machinekit.io/debian/pool/main/m/machinekit/
regards
Serial : 00000000376aff9f
-----------------------------------------------------------------------------------------------------------
But I get this error in /var/log/linuxcnc.log when trying to
load hal_gpio:
Oct 23 11:00:23 raspberrypi rtapi:0:
rtapi_app_main(hal_gpio): -22 Invalid argument
Oct 23 11:00:23 raspberrypi msgd:0: hal_lib:1854:rt
HAL_GPIO: ERROR: board revision 5 not supported
This is just because it defaults to 5 if the rev number is not in
the list
I am not worried about breaking my installation. I would
like to try and use a buildroot system eventually. Currently
just testing.
--
website: http://www.machinekit.io
blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io
blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io
blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
|
