Please read the previous thread I linked
You can't just burn AN updated image, from the ancient one you were using.
You need to use an image which has the halcmd pexists fix reinstated
after the multicore merge.
On 12/05/2017 01:33, Mike Cinquino wrote:
I burned an updated image. Looks like I made some progress. It looks
like it found it. I get the following error.
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs
INIVAR=/usr/libexec/linuxcnc/inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
MACHINEKIT - 0.1
Machine configuration directory is
'/home/machinekit/machinekit/configs/sim.axis.xhc-hb04-1'
Machine configuration file is 'xhc-hb04-layout2.ini'
INIFILE=/home/machinekit/machinekit/configs/sim.axis.xhc-hb04-1/xhc-hb04-layout2.ini
PARAMETER_FILE=sim-9axis.var
TASK=milltask
HALUI=halui
DISPLAY=axis
Starting Machinekit...
Starting Machinekit server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting Machinekit IO program: io
io started
halcmd loadusr io started
Starting HAL User Interface program: halui
Shutting down and cleaning up Machinekit...
Killing task linuxcncsvr, PID=5478
xhc-hb04: waiting for XHC-HB04 device
xhc-hb04: found XHC-HB04 device
xhc-hb04: connection lost, cleaning up
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Cleanup done
Debug file information:
Unknown 'show' type 'pexists'
while executing
"hal show pexists xhc-hb04.button-goto-zero"
("eval" body line 1)
invoked from within
"eval hal show $args"
(procedure "show" line 1)
invoked from within
"show pexists $name"
(procedure "pin_exists" line 2)
invoked from within
"pin_exists $fullbname"
(procedure "connect_pins" line 24)
invoked from within
"connect_pins "
(file "xhc-hb04.tcl" line 400)
invoked from within
"source $filename"
invoked from within
"set result [source $filename]"
(file "/usr/bin/haltcl" line 55)
libgcc_s.so.1 must be installed for pthread_cancel to work
/usr/bin/linuxcnc: line 750: 5547 Aborted haltcl -i "$INIFILE" $CFGFILE
5478
PID TTY STAT TIME COMMAND
Stopping realtime threads
Unloading hal components
libusb: error [do_close] Device handle closed while transfer was still
being processed, but the device is still connected as far as we know
libusb: warning [do_close] A cancellation for an in-flight transfer
hasn't completed but closing the device handle
*** Error in `xhc-hb04': free(): corrupted unsorted chunks: 0x0002d520 ***
On Thu, May 11, 2017 at 10:21 AM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
On 11/05/17 15:06, Mike Cinquino wrote:
Thank you. That may be the problem as I am using "linuxcnc" at
the command prompt to launch. This is an older image I am using.
It seemed to me that "machinekit" to launch did not work. I will
have to check again.
If it is that old, the XHC-HB04 is probably broken, I made the
commit to provide a symlink of 'machinekit' in 34c00e0
<https://github.com/machinekit/machinekit/commit/34c00e082c6446dfbc541de6163a4382e8473dfe>
on 13 Mar 2015
You need a recent image, I fixed XHC in commit 0d3f6b4
<https://github.com/machinekit/machinekit/commit/0d3f6b4d3c5aa89f1b75203be1efd4417a92182e>
on 22 Aug 2016, so the image needs to be after that.
On Thursday, May 11, 2017 at 9:49:38 AM UTC-4, Schooner wrote:
On 11/05/17 14:19, Mike Cinquino wrote:
Hello,
I am attempting to use a USB hb04 pendant. This is the hard
wired USB version 18 keys. I can't find any other model info
or part numbers for this unit.
I have verified that the pendant is being seen by using the
lsusb command and finding the expected id value.
To start I am trying to get it to work in sim by using the
prepackaged sim configuration unmodified. I select it from
the tree after launching linuxcnc.
I am running linuxcnc version 2.7.0 pre.... (I am going from
memory on this.)
This is Machinekit not Linuxcnc, make sure you are running
the correct system or there is no point going into this
The sim works fine as per this thread,
https://groups.google.com/forum/#!msg/machinekit/8mMHqZ_Zb80/onJM1rvsBAAJ;context-place=forum/machinekit
<https://groups.google.com/forum/#%21msg/machinekit/8mMHqZ_Zb80/onJM1rvsBAAJ;context-place=forum/machinekit>
I am using the Xylotex BeagleCNC BBB_DB25/26 cape. (Not that
it matters as I am working in sim)
After I select configuration and LCNC tries to load.. I see
it going through multiple ports and it ends up not finding it.
I followed the instructions on the read me file and added
the recommend .rules file to udev directory. Still no luck.
Not sure what to try next.
Any help would be greatly appreciated.
Thanks,
Mike
--
website: http://www.machinekit.io blog:
http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
Visit this group at
https://groups.google.com/group/machinekit
<https://groups.google.com/group/machinekit>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit
<https://groups.google.com/group/machinekit>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to a topic in
the Google Groups "Machinekit" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/machinekit/OvxRsCF3auI/unsubscribe
<https://groups.google.com/d/topic/machinekit/OvxRsCF3auI/unsubscribe>.
To unsubscribe from this group and all its topics, send an email
to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit
<https://groups.google.com/group/machinekit>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
