I can confirm the both the BBG and BBGW will boot with this image from an SD card: https://rcn-ee.com/rootfs/bb.org/testing/2017-02-12/machinekit/bone-debian-8.7-machinekit-armhf-2017-02-12-4gb.img.xz
Getting wireless to actually work is a whole other ball game which I have yet to achieve, but at least the image boots now. On Wednesday, July 12, 2017 at 8:34:09 AM UTC-4, Deemarc Burakitbumrung wrote: > > I'm working on the similar things. I am using beaglebone black and with > xenomai on linux 3.8.13 and I tried to use it with BBGW and yeah it refuse > to boot and my SD card and boot with the image in emmc instead. Have you by > any chance be able to run BBGW with 3.8.13? > > Thanks > Deemarc B. > เมื่อ วันพุธที่ 28 กันยายน ค.ศ. 2016 17 นาฬิกา 10 นาที 09 วินาที UTC+7, > Unai Antero เขียนว่า: >> >> Dear all, >> >> trying to use a SeeedStudio BeagleBone Green Wireless (+ the CRAMPS >> board) to run machinekit, but without much success... >> >> Tried using the SD image on >> https://rcn-ee.com/rootfs/bb.org/testing/2016-09-18/machinekit/bone-debian-8.6-machinekit-armhf-2016-09-18-4gb.img.xz >> >> , but although it works fine on a Beagle Bone Black, the BB Green Wireless >> refuses to boot (seems it doesn't like the 3.8 kernel...). >> >> On a second attempt, was able to start from a fresh Debian Jessie on the >> BeagleBone Green Wireless (that uses the 4.4.9 kernel), installed >> the 4.4.9-bone-rt-r10 kernel, and installed machinekit-rt-preempt (apt-get >> install from packages at http://deb.machinekit.io/debian) >> >> Machinekit tries to start the CRAMPS setup, but fails as it expects >> things to be in /sys/devices/bone_capemgr.*/slots .... and on this >> kernel, seems things are on /sys/devices/platform/bone_capemgr/slots >> (among other changes...) >> >> Has anyone been able to run machinekit on the BeagleBone Green Wireless? >> >> Thanks >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
