The DE0-Nano image will /probably/ boot on the DE10, but the FPGA will not be programmed. If the DE10 doesn't boot, the issue is almost certainly the kernel and/or device tree. If you use the kernel and device tree from the DE10 image on a DE0 image you ought to be able to boot with the DE0 uSD.
Basically, it looks like the DE10 is the DE0 with a larger FPGA and an HDMI output... ...and all of the Cyclone-V SoC+FPGA parts share the same ARM hard processor side, so the kernel/device-tree will be mostly identical for things like Ethernet, uSD, flash, SDRAM, etc. as long as the boards are not too dramatically different. On 7/30/2017 6:07 PM, mugginsac wrote: > Charles, > > OK, I got my DE10-nano. So let me ask another question, will the DE0-Nano-Soc > MachineKit image boot on the DE10-Nano board (as a starting point for doing > the > implementation)? Or do I need to start with the DE10-Nano image from Terasic? > > Alan > > On Thursday, July 27, 2017 at 9:21:19 AM UTC-7, mugginsac wrote: > > I placed the order for a DE10-Nano. > Alan > > On Wednesday, July 26, 2017 at 2:15:29 PM UTC-7, Charles Steinkuehler > wrote: > > > I'll try to carve out some time to get an FPGA project setup for the > DE10-nano, unless someone else feels up to the task. > > -- > Charles Steinkuehler > [email protected] > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email > to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
