I got a USB OTG cable from Digikey and I am now able to boot the DE10-Nano 
with an HDMI monitor, keyboard and mouse.

On Tuesday, August 8, 2017 at 8:49:21 AM UTC-7, mugginsac wrote:
>
> Charles,
>
> I understand how ignoring HDMI to start may be easier, however, the reason 
> that I bought the DE10 instead of the DE0 is the HDMI. :-(
>
> Alan
>
> On Tuesday, August 8, 2017 at 4:01:07 AM UTC-7, Charles Steinkuehler wrote:
>>
>> Yes, it would be much easier to load a single FPGA image via U-Boot 
>> rather than deal with partial reconfiguration. 
>>
>> I was planning on just ignoring the HDMI to start.  :) 
>>
>> On 8/7/2017 11:05 PM, Michael Brown wrote: 
>> > BTW 
>> > It may be possible to boot configuring the fpga from u-boot with 
>> framebuffer and 
>> > hm2 cores and then start machinekit hm2_soc_ol driver without 
>> firmware=xxx.dtbo 
>> > for easy DE10-Nano fb startup. (uio driver then needs a uio entty in 
>> dts also to 
>> > load). 
>> > 
>> > 
>>
>>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to