First I created the schematic: https://github.com/the-snowwhite/socfpga-kicad/tree/master/Cramps2nano-soc
My first Prusa-i3 setup I wired manually. The second larger setup I soldered an board adaptor for, however the tmc2130 spi daisy chain is wired manually. I use the LTC interface for the spi (not included in the schematic). And just made some pics: https://drive.google.com/drive/folders/0BwyLvgyVIdi8NXFpWXRvNGt3NmM?usp=sharing On Thursday, 31 August 2017 17:41:00 UTC+2, Charles Steinkuehler wrote: > > On 8/30/2017 4:59 PM, Michael Brown wrote: > > > > For the CRAMPS board initially: > > > > First exercise was to get the CRAMPS board added for the fpga socs and > the > > universal soc_adc drivers / soc_adc_temp usercomponent added to > machinekit > > How are you connecting the CRAMPS board to your FPGA board? > > Got any pictures? > > -- > Charles Steinkuehler > [email protected] <javascript:> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
