OK, I have got "DE10_Nano_FB_DB25" building the dts, dtb and rbf with no errors. But before I try to use it on my DE10_Nano, it seems to me that Michael wrote something recently about setting some area of memory to load something. I have searched with no luck. So if you remember writing something Michael, could you point me to it again???
Charles took what I had done earlier and fixed it so that it would build on quartus 15.1. I had forgotten to add the hdmi stuff into DE10_Nano_FB_DB25.vhd. So I fixed that. I have pushed my fixes using 17.1 back to github/muggins/mksocfpga branch muggins-master. Alan On Tuesday, August 29, 2017 at 6:05:32 AM UTC-7, Michael Brown wrote: > > Michael Brown <javascript:> has invited you to *contribute to* the > following shared folder: > DE10-DE0-Nano > <https://drive.google.com/drive/folders/0BwyLvgyVIdi8ZG1vYTFzc01EOXc?usp=sharing_eil&ts=59a5669b> > [image: Sender's profile photo]DE10-SoC Machinekit demo image with > framebuffer > This image also works with the Atlas (DE0-Nano-Soc) board(tested) > Open > <https://drive.google.com/drive/folders/0BwyLvgyVIdi8ZG1vYTFzc01EOXc?usp=sharing_eip&ts=59a5669b> > > > > > > > > > > > > > > > > > > > > Google Drive: Have all your files within reach from any device. > Google Inc. 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA [image: > Logo for Google Drive] <https://drive.google.com> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
