Hi Tim,

Sorry to disturb you again.

Just wanted to confirm that do you experience this weird symptom or not 
with RPi 3.

I had tested the sample PCB gcode file from thls link 

With the sample  \Theremino_CNC\GCodes\PCB Large\Alim1 ( optim 1m ) ( mill 
milling everything look normal, the stepping motors can return origin 

But when minimised the MachineKit window, everything look weird, 
  1) stepper motors running faster, not according to the feeding velocity
  2) stepper motors missed steps, cannot return to origin location after 
complete milling (G00 X0.000 Y0.000 z10.000)
      it took about 1.45 hrs

KL Chin

On Thursday, 9 August 2018 22:04:14 UTC+8, Timothy March wrote:
> Thank you KL Chin
> Tim

website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to