Without precise details of what you are doing, it is impossible to judge.
It is well known that big gcode files will cause Axis to eat all memory
on small boards when doing a preview, but that is NOT a leak.
Whether that happens more quickly on Stretch, which may well be a
'heavier' system, I don't know.
You can mitigate it to an extent by disabling previews, has been
discussed many times on this list.
The only full solution is to use a more capable computer / board or a
different GUI.
On 12/08/18 14:34, Timothy March wrote:
On RPI using RT kernel with Stretch and it dosen’t matter which RT kernel you
use. I use Htop to monitor system memory climbs until it is out. This happens
on RPI and Tinkerboard but not when using Jessie it is a very slow leak
Tim
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
