Hi Pierre, > On 12 Nov 2018, at 00:03, Pierre Auge <[email protected]> wrote: > > This 3D printer CRAMPS config loads Axis with no errors, but hangs and > effectively crashes the BBBW.
And what does it say? What are the error messages? export DEBUG=5 and start Machinekit. Then pastebin (do not attach) the session from /var/log/linuxcnc.log We cannot start to guess what’s happening without some meaningful information. > It took me a while to wrap my head around this config but I feel like it > should work. Which config exactly? Again, we’re not looking over your shoulder so you need to provide more input. Bas > It is a dual x/y drive system with parallel motors on the X and Y axis. 2X, > 2Y, 1Z, and an extruder. Similar to the MPCNC. > > I've tested the standard cramps configs with the machine running with motors > in parallel on a single driver and everything is fine. > > > Thanks > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > <CRAMPS.hal> > <CRAMPS.ini> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
