Ughhh cancel last none of the example configs will load on the 4.14.x image
On Monday, November 12, 2018 at 4:28:59 PM UTC-5, Pierre Auge wrote: > > ok now we're talking. > > I have been using the pre-built, 8.7 image from elinux.org > > My own modified configs: > > https://github.com/PierreAuge/machinekit-config/blob/master/CRAMPS.hal > https://github.com/PierreAuge/machinekit-config/blob/master/CRAMPS.ini > > with this setup it's seriously not giving me any errors. Everything loads, > axis runs and as soon as I unlock the e-stop everything just halts. > > -------------------------------- > > So, I have the day off here, now I've setup a newer Stretch image with > 4.14.x rt kernel. > > Now i'm getting some error outputs. and here it is. Finally: > https://github.com/PierreAuge/machinekit-config/blob/master/linuxcnc.log > > > > On Monday, November 12, 2018 at 4:09:38 PM UTC-5, Bas de Bruijn wrote: >> >> Pierre, >> >> On 12 Nov 2018, at 20:02, Pierre Auge <pjr....@gmail.com> wrote: >> >> Bas, >> >> It's hard to pastebin an empty file. >> >> /var/log/linuxcnc.log is empty, no errors are being logged. Hence the the >> comment "no errors, but hangs and effectively crashes the BBBW." >> You could imagine how hard it is from my end to diagnose a problem when >> the problem is not being logged as a problem. >> >> >> I can’t help you without errors. That’s like walking around on bare feet >> in a dark room with LEGO pieces scattered over the floor. >> >> Let’s take one step back. >> How is your setup? Meaning what image did you use? Do you run from >> packages or have you compiled yourself? >> >> I'm referring to the HAL config file I attached. >> >> >> I’m working from a mobile device. Please post a link to you config, >> either pastebin links or a github account with your (if modified) >> configuration. If stock, then the link from the github repo that you use. >> >> http://www.machinekit.io/docs/getting-help/ >> >> I'm trying to understand what if anything in the HAL config could be >> causing the beagleboard to become unusable *without posting any errors.* >> >> >> Your /var/log/linuxcnc.log file should contain some info at least, for >> each session some general messages. So there’s definitely something strange >> going on. >> >> >> Apologies for any lack of clarity. >> >> Pierre >> >> >> >> >> On Monday, November 12, 2018 at 12:29:23 AM UTC-5, Bas de Bruijn wrote: >>> >>> Hi Pierre, >>> >>> On 12 Nov 2018, at 00:03, Pierre Auge <pjr....@gmail.com> wrote: >>> >>> This 3D printer CRAMPS config loads Axis with no errors, but hangs and >>> effectively crashes the BBBW. >>> >>> >>> And what does it say? What are the error messages? >>> export DEBUG=5 and start Machinekit. Then pastebin (do not attach) the >>> session from /var/log/linuxcnc.log >>> >>> We cannot start to guess what’s happening without some meaningful >>> information. >>> >>> It took me a while to wrap my head around this config but I feel like it >>> should work. >>> >>> >>> Which config exactly? >>> Again, we’re not looking over your shoulder so you need to provide more >>> input. >>> >>> Bas >>> >>> It is a dual x/y drive system with parallel motors on the X and Y axis. >>> 2X, 2Y, 1Z, and an extruder. Similar to the MPCNC. >>> >>> I've tested the standard cramps configs with the machine running with >>> motors in parallel on a single driver and everything is fine. >>> >>> >>> Thanks >>> >>> -- >>> website: http://www.machinekit.io blog: http://blog.machinekit.io >>> github: https://github.com/machinekit >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Machinekit" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to machinekit+...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/machinekit. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> <CRAMPS.hal> >>> >>> <CRAMPS.ini> >>> >>> -- >> website: http://www.machinekit.io blog: http://blog.machinekit.io >> github: https://github.com/machinekit >> --- >> You received this message because you are subscribed to the Google Groups >> "Machinekit" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to machinekit+...@googlegroups.com. >> Visit this group at https://groups.google.com/group/machinekit. >> For more options, visit https://groups.google.com/d/optout. >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.