ok now we're talking. I have been using the pre-built, 8.7 image from elinux.org
My own modified configs: https://github.com/PierreAuge/machinekit-config/blob/master/CRAMPS.hal https://github.com/PierreAuge/machinekit-config/blob/master/CRAMPS.ini with this setup it's seriously not giving me any errors. Everything loads, axis runs and as soon as I unlock the e-stop everything just halts. -------------------------------- So, I have the day off here, now I've setup a newer Stretch image with 4.14.x rt kernel. Now i'm getting some error outputs. and here it is. Finally: https://github.com/PierreAuge/machinekit-config/blob/master/linuxcnc.log On Monday, November 12, 2018 at 4:09:38 PM UTC-5, Bas de Bruijn wrote: > > Pierre, > > On 12 Nov 2018, at 20:02, Pierre Auge <[email protected] <javascript:>> > wrote: > > Bas, > > It's hard to pastebin an empty file. > > /var/log/linuxcnc.log is empty, no errors are being logged. Hence the the > comment "no errors, but hangs and effectively crashes the BBBW." > You could imagine how hard it is from my end to diagnose a problem when > the problem is not being logged as a problem. > > > I can’t help you without errors. That’s like walking around on bare feet > in a dark room with LEGO pieces scattered over the floor. > > Let’s take one step back. > How is your setup? Meaning what image did you use? Do you run from > packages or have you compiled yourself? > > I'm referring to the HAL config file I attached. > > > I’m working from a mobile device. Please post a link to you config, either > pastebin links or a github account with your (if modified) configuration. > If stock, then the link from the github repo that you use. > > http://www.machinekit.io/docs/getting-help/ > > I'm trying to understand what if anything in the HAL config could be > causing the beagleboard to become unusable *without posting any errors.* > > > Your /var/log/linuxcnc.log file should contain some info at least, for > each session some general messages. So there’s definitely something strange > going on. > > > Apologies for any lack of clarity. > > Pierre > > > > > On Monday, November 12, 2018 at 12:29:23 AM UTC-5, Bas de Bruijn wrote: >> >> Hi Pierre, >> >> On 12 Nov 2018, at 00:03, Pierre Auge <[email protected]> wrote: >> >> This 3D printer CRAMPS config loads Axis with no errors, but hangs and >> effectively crashes the BBBW. >> >> >> And what does it say? What are the error messages? >> export DEBUG=5 and start Machinekit. Then pastebin (do not attach) the >> session from /var/log/linuxcnc.log >> >> We cannot start to guess what’s happening without some meaningful >> information. >> >> It took me a while to wrap my head around this config but I feel like it >> should work. >> >> >> Which config exactly? >> Again, we’re not looking over your shoulder so you need to provide more >> input. >> >> Bas >> >> It is a dual x/y drive system with parallel motors on the X and Y axis. >> 2X, 2Y, 1Z, and an extruder. Similar to the MPCNC. >> >> I've tested the standard cramps configs with the machine running with >> motors in parallel on a single driver and everything is fine. >> >> >> Thanks >> >> -- >> website: http://www.machinekit.io blog: http://blog.machinekit.io >> github: https://github.com/machinekit >> --- >> You received this message because you are subscribed to the Google Groups >> "Machinekit" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> Visit this group at https://groups.google.com/group/machinekit. >> For more options, visit https://groups.google.com/d/optout. >> >> <CRAMPS.hal> >> >> <CRAMPS.ini> >> >> -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
