> On 18 Nov 2018, at 12:39, Pierre Auge <[email protected]> wrote: > > Bas, > > My friend, that is what we call a typo.
Yes, that was certainly a high ranking possibility :) I was wondering (just curious ) why you use an older debian Jessie xenomai image, instead of the newer stretch rt-preempt one. > Thank you, sooo much! It loaded instantly when I made the correction. > > You just saved me so much work. Now on to testing. > > Pierre Glad it worked out! > >> On Sunday, November 18, 2018 at 5:38:36 AM UTC-5, Bas de Bruijn wrote: >> Pierre, >> >>> On 15 nov. 2018, at 06:55, Bas de Bruijn <[email protected]> wrote: >>> >>> >>> >>>> On 15 Nov 2018, at 00:06, Pierre Auge <[email protected]> wrote: >>>> >>>> https://github.com/PierreAuge/machinekit-config/blob/master/linuxcnc.log >>>> >> >> You should look into these lines >> https://github.com/PierreAuge/machinekit-config/blob/master/linuxcnc.log#l1120 >> >> Which say something about this line >> https://github.com/PierreAuge/machinekit-config/blob/master/CRAMPS.ini#l97 >> >> Looks like you want a servo thread of 10kHz and on a bbbw and that's a too >> much I think. >> Normally you run at 1kHz which is more than enough (look at the original) >> https://github.com/machinekit/machinekit/blob/master/configs/ARM/BeagleBone/CRAMPS/CRAMPS.ini#l105 >> >> Bas >> >>>> >>>> Bas, >>>> >>>> Apologies about the back and forth. I really do appreciate you taking the >>>> time to help me. The linked log file should present something more useful >>>> now. >>>> >>>> Pierre >>> >>> Where did you obtain the image from >>> What’s the output of ‘uname -a’ >>> What’s the output of ‘dmesg’ >>> >>>> >>>>> On Tuesday, November 13, 2018 at 12:52:52 AM UTC-5, Bas de Bruijn wrote: >>>>> >>>>> >>>>> > On 12 Nov 2018, at 22:28, Pierre Auge <[email protected]> wrote: >>>>> > >>>>> > Now i'm getting some error outputs. and here it is. Finally: >>>>> > https://github.com/PierreAuge/machinekit-config/blob/master/linuxcnc.log >>>>> > >>>>> >>>>> Looks like these are just normal messages. >>>>> Please in a terminal: >>>>> export DEBUG=5 >>>>> >>>>> Then start Machinekit from that terminal: >>>>> machinekit & >>> -- >>> website: http://www.machinekit.io blog: http://blog.machinekit.io github: >>> https://github.com/machinekit >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "Machinekit" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> Visit this group at https://groups.google.com/group/machinekit. >>> For more options, visit https://groups.google.com/d/optout. > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
