There are now a new set of packages in the repo with the serial
0.1.1543248182.gite5f547c
Please test on your i386 machines and confirm they work.
I have now reverted a series of commits, which look to be the
cause.
(what exactly can build and package for all architectures without
errors,
but cause failure when running on i386 only, remains to be seen!)
A local package build from this tests OK in the i386 VM, so
hopefully cured.
The repo is rebuilding packages and they will be available in a
couple of hours.
I will update when they are in the repo and can be pulled for
testing.
I have now created a Debian Stretch i386 VM and installed
machinekit dependencies.
It does not run properly because of other issues, but I can see
that i386 packages
start to fail at 0.1.1538832043git84c94e8-1-stretch
For now just use packages prior to this
To do this, for those not that familiar with linux
Download
http://deb.machinekit.io/debian/pool/main/m/machinekit/machinekit_0.1.1538495763.git1d57feb-1~stretch_i386.deb
or earlier
and the corresponding flavour package, for instance
http://deb.machinekit.io/debian/pool/main/m/machinekit/machinekit-rt-preempt_0.1.1538495763.git1d57feb-1~stretch_i386.deb
cd to the directory they were downloaded to.
(instructions assume rt-preempt kernel)
$ sudo apt remove machinekit machinekit-rt-preempt
$ sudo dpkg -i
machinekit_0.1.1538495763.git1d57feb-1~stretch_i386.deb
machinekit-rt-preempt_0.1.1538495763.git1d57feb-1~stretch_i386.deb
If there is a missing dependency error,
$ sudo apt install <dependency>
then re-run the dpkg line
I will update when the source of the problem is identified and
fixed
On Wednesday, November 21, 2018 at 5:59:07 PM UTC-7, [email protected] wrote:
Hello,
isn't the newest Machinekit Debian package broken? I
upgraded my test system installation with apt-get
upgrade (Debian 9 Stretch: Linux machinekit
4.9.0-8-rt-686-pae #1 SMP PREEMPT RT Debian 4.9.130-2
(2018-10-27) i686 GNU/Linux) to the newest package
(0.1.1542196491.git9c3423c-1~stretch), however
trying to start machinekit with sim.axis/axis.ini I
got the error
I'm having the same issue. same install on a P4
64bit 3.0Ghz 4G ram
This system has been running Linuxcnc for more than 4
years.
Also upgraded to 2.7 last summer. I have 4 machines
in total running on P4s Linuxcnc.
There is no 2.7
Are you running linuxcnc or machinekit?
Can't find . 'machinekit_0.1.1537365199.
gitf63b8a2-1~stretch_i386' you
suggested.
It is in the repo, where you might expect it to be.
http://deb.machinekit.io/debian/pool/main/m/machinekit/machinekit_0.1.1537365199.gitf63b8a2-1~stretch_i386.deb
If you can help confirm definitely at which package version
number this problem begins, we might be able to start
tracking it down.
I don't have any i386 computers any more and there is no
error on amd64.
Is Machinekit for programmers only?
Scott
--
website: http://www.machinekit.io blog:
http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
|
