On Mon, Feb 11, 2019 at 12:25 PM Charles Steinkuehler <char...@steinkuehler.net> wrote: > > On 2/4/2019 12:32 PM, Robert Nelson wrote: > > On Mon, Feb 4, 2019 at 6:36 AM Charles Steinkuehler > > <char...@steinkuehler.net> wrote: > >> > >> On 2/4/2019 1:15 AM, Malte Schmidt wrote: > >>> Not yet. > >>> > >>> I asked the same question here: > >>> https://groups.google.com/forum/#!category-topic/beaglebone/beagleboardorg-beaglebone-black/wEv-JGvom8U > >>> > >>> and was suggested to go with 4.19. I tried this and it does indeed boot > >>> fast. The current issue is that I lack the PRU drivers (rproc) for this > >>> kernel. My next try would be to investigate if the rproc drivers can be > >>> replaced by the UIO version. > >>> ... and I totally don't know if this approach makes sense at all as I'm > >>> far > >>> from exactly knowing what I'm doing / using and how rproc or UIO differ > >>> .... > >> > >> Have you tried configuring U-Boot to load the UIO driver? > >> > >> Robert tries to keep this working with all kernel flavors so you > >> should just have to set: > >> > >> uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo > >> > >> Details: > >> https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_PRU_Options > > > > Sadly post v4.18.x the uio-pru driver on mainline is broken for > > "uio".. Around the same time Roger from TI posted his first pass at > > remoteproc for mainline, so I've been focusing on that instead. > > Looks like this just got fixed: > > https://groups.google.com/forum/#!msg/beagleboard/poKd5tCRD04/Zjc1hNxLAwAJ
Yeap, Matthijs fixed it, the new "4.19.15-ti-rt-r8" should be available in a few hours.. Regards, -- Robert Nelson https://rcn-ee.com/ -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
