On Wednesday, May 1, 2019 at 2:50:24 PM UTC-5, Charles Steinkuehler wrote: > > > You'll need to disable HDMI to use those PRU pins on P8: > > > ...I think you then need to either load a different universal overlay > or a second chunk of the overlay that will add support for those pins. > > > Yes, getting CLOSER!! So, I commented out the HDMI line, and then added universalh right after the PRU-UIO overlay, like this: uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo uboot_overlay_pru=/lib/firmware/cape-universalh-00A0.dtbo And, now, I do see the additional IO pins, but uio_pruss is not loaded. cape-universalh was already part of this build.
Was the above the right way to do this? Thanks, Jon -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
