On 5/1/2019 3:36 PM, Jon Elson wrote: > Meanwhile, there seems to be a discrepancy/deficiency in config-pin. > > I can set a pin for gpio with pullup, or pruin, but I have not found ANY > syntax that allows you to set a pin for pruin WITH pullup.
Each available pin mode requires a unique entry. I created multiple gpio entries for each pin to allow (en|dis)abling the internal pull-up/down resistors, but there's just one PRU input mode per pin. If you need to change the pull-up/down settings, you _will_ have to either edit the universal overlay source, or add another overlay to modify the PRU pin entries. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
