I have test all the output they do the same things but i have see something related to "net drv_enable axis.0.amp-enable-out" used for enable driver signal, this one is revert to default after stopping GUI.
so i have do and seems to work fine : loadrt and2 names=and2.spindle-ena addf and2.spindle-ena servo-thread # Spindle control signals + and2 for stop spindle after stopping GUI net spindle-enable <= motion.spindle-on net spindle-enable => pid.spindle.enable net spindle-enable => and2.spindle-ena.in0 net drv-enable => and2.spindle-ena.in1 net spindle-and2enable <= and2.spindle-ena.out net spindle-and2enable => fur.do-6 It is ok for you ? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/c63236c9-8811-4f16-9db5-b9773fb72fae%40googlegroups.com.
