Well i got Masquerading working. Turns out my cable was fine, but
NT was having trouble talking to the NIC. I ended up swaping out the NIC
in the NT box, reinstalled NT and now masq is working fine. Thanks to all
for the ideas and help. I really appriciate it.
-jason
On Thu, 18 Feb 1999, Lourdes A Jones wrote:
> Hi Jason,
>
> This sounds suspiciously like a bad cable problem. (Doesn't matter if it's
> brand new, sometimes they come broken.)
>
> Just to eliminate hardware setup problems... have you used the configuration
> utilities that came with the cards and done the full test routines over the
> connection?
>
> You typically need to boot to DOS (sigh) and run the setup program, then set
> one machine as the listener then test the other (provided the internal
> loopback tests worked) ... then reverse.
>
> If you pass the cards network tests, then you can begin to worry about Linux
> <-> NT problems.
>
> Lourdes
>
>
>
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
