/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! */
# ifconfig -a
eth0 on 24.93.21.245
eth1 on 192.168.0.1
# netstat -rn
shows you routing 192.168.* (by default) out eth0
try adding a route for 192.168...
# route add -net 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 eth1
At 01:23 AM 3/12/2000 , Lauren McClure reported that...
>[ ifconfig -a ]
>eth0 Link encap:Ethernet HWaddr 00:50:DA:B4:7D:EB
> inet addr:24.93.21.245 Bcast:24.93.21.255 Mask:255.255.255.0
> UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
> RX packets:424 errors:0 dropped:0 overruns:0 frame:0
> TX packets:253 errors:0 dropped:0 overruns:0 carrier:3
> collisions:1 txqueuelen:100
> Interrupt:9 Base address:0xfc80
>
>eth1 Link encap:Ethernet HWaddr 00:50:04:19:5D:79
> inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
> BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:10 Base address:0x300
>
>lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:16 errors:0 dropped:0 overruns:0 frame:0
> TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
>[ ipchains -L ]
>Chain input (policy ACCEPT):
>target prot opt source destination ports
>ACCEPT udp ------ anywhere anywhere bootps ->
>bootpc
>Chain forward (policy DENY):
>target prot opt source destination ports
>MASQ all ------ 192.168.0.0/24 anywhere n/a
>Chain output (policy ACCEPT):
>
>[ netstat -rn ]
>Kernel IP routing table
>Destination Gateway Genmask Flags MSS Window irtt
>Iface
>24.93.21.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
>127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
>0.0.0.0 24.93.21.1 0.0.0.0 UG 0 0 0 eth0
>
>[ rc.firewall ]
>After I reboot and check /proc/sys/net/ipv4/ip_forward - it's always 0,
>but if I run the rc.firewall script by hand, it is set correctly to 1.
>So I always set it manually - usually with the standard echo line.
>
>Any help is really appreciated...
>thanks
>
>_______________________________________________
>Masq maillist - [EMAIL PROTECTED]
>Admin requests can be handled at http://www.indyramp.com/masq-list/ -- THIS INCLUDES
>UNSUBSCRIBING!
>or email to [EMAIL PROTECTED]
>
>PLEASE read the HOWTO and search the archives before posting.
>You can start your search at http://www.indyramp.com/masq/
>Please keep general linux/unix/pc/internet questions off the list.
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
Admin requests can be handled at http://www.indyramp.com/masq-list/ -- THIS INCLUDES
UNSUBSCRIBING!
or email to [EMAIL PROTECTED]
PLEASE read the HOWTO and search the archives before posting.
You can start your search at http://www.indyramp.com/masq/
Please keep general linux/unix/pc/internet questions off the list.
