Its means loadprofile.rows= [1 x 99 ]
Thanks Stephanie for your help. Kind Regard, Mohammad Ammar Raza On 9 May 2017 at 15:25, Stephanie <[email protected]> wrote: > Yes, and the value of rows, 0 means the load is applied to the all buses, > so you should also change the value of the rows by loadprofile.rows=load_index > (e.g. loadprofile.rows=[2 3 5]), if there are three loads located in bus 2, > 3 and 5, respectively) > > Best Regards, > Stephanie > > 2017-05-09 22:09 GMT+08:00 Ammar Raza <[email protected]>: > >> that means >> >> loadprofile = struct( ... >> 'type', 'mpcData', ... >> 'table', CT_TLOAD, ... >> 'rows', 0, ... >> 'col', CT_LOAD_ALL_PQ, ... >> 'chgtype', CT_REP, ... >> 'values', [] ); >> >> loadprofile.values(:, 1, :) = [ 24 x 99 ] >> >> >> Kind Regard, >> >> Mohammad Ammar Raza >> >> >> >> >> On 9 May 2017 at 14:55, Stephanie <[email protected]> wrote: >> >>> Hi, >>> >>> I tried it a few days before, what I did is: >>> >>> loadprofile.rows=load_index; %which applies the load to the bus it >>> locates >>> loadprofile.value (:,1,:) = [24 x 99]; >>> >>> And it works in my situation >>> >>> Hope it will help you >>> ------------------------------ >>> Best Regards >>> Stephanie >>> >>> >>> *From:* Ammar Raza <[email protected]> >>> *Date:* 2017-05-09 21:43 >>> *To:* MATPOWER discussion forum <[email protected]> >>> *Subject:* MOST >>> Hi all, >>> >>> I am working on bus 118 with 54 generator and 99 loads. >>> >>> I would like to ask you for the multi period problem i.e. 24 hours, how >>> I will make the load profile function. Can I do like that >>> >>> loadprofile.value (:,1,1) = [24 x 99]; >>> >>> >>> >>> As in case3a in the MOST manual there is only one load therefore, load >>> profile matrix is [12 x 1] >>> >>> loadprofile.value(:,1,1)=[ >>> 440; >>> 480; >>> .. >>> .. >>> .. ]; >>> >>> >>> Kind Regard, >>> >>> Mohammad Ammar Raza >>> >>> >>> >>> >> >
