Just to clarify, if loadprofile.rows = 0, then loadprofile.values(:, 1, :) = [24 x 1] and all loads are scaled together. Otherwise, the number of columns in loadprofile.values(:, 1, :) must equal the length of loadprofile.rows and each of the specified loads is scaled separately.
Ray > On May 9, 2017, at 10:29 AM, Ammar Raza <[email protected]> wrote: > > Its means > > loadprofile.rows= [1 x 99 ] > > Thanks Stephanie for your help. > > Kind Regard, > > Mohammad Ammar Raza > > > > > On 9 May 2017 at 15:25, Stephanie <[email protected] > <mailto:[email protected]>> wrote: > Yes, and the value of rows, 0 means the load is applied to the all buses, so > you should also change the value of the rows by loadprofile.rows=load_index > (e.g. loadprofile.rows=[2 3 5]), if there are three loads located in bus 2, 3 > and 5, respectively) > > Best Regards, > Stephanie > > 2017-05-09 22:09 GMT+08:00 Ammar Raza <[email protected] > <mailto:[email protected]>>: > that means > > loadprofile = struct( ... > 'type', 'mpcData', ... > 'table', CT_TLOAD, ... > 'rows', 0, ... > 'col', CT_LOAD_ALL_PQ, ... > 'chgtype', CT_REP, ... > 'values', [] ); > > loadprofile.values(:, 1, :) = [ 24 x 99 ] > > > Kind Regard, > > Mohammad Ammar Raza > > > > > On 9 May 2017 at 14:55, Stephanie <[email protected] > <mailto:[email protected]>> wrote: > Hi, > > I tried it a few days before, what I did is: > > loadprofile.rows=load_index; %which applies the load to the bus it locates > loadprofile.value (:,1,:) = [24 x 99]; > > And it works in my situation > > Hope it will help you > Best Regards > Stephanie > > From: Ammar Raza <mailto:[email protected]> > Date: 2017-05-09 21:43 > To: MATPOWER discussion forum <mailto:[email protected]> > Subject: MOST > Hi all, > > I am working on bus 118 with 54 generator and 99 loads. > > I would like to ask you for the multi period problem i.e. 24 hours, how I > will make the load profile function. Can I do like that > > loadprofile.value (:,1,1) = [24 x 99]; > > > > As in case3a in the MOST manual there is only one load therefore, load > profile matrix is [12 x 1] > > loadprofile.value(:,1,1)=[ > 440; > 480; > .. > .. > .. ]; > > > Kind Regard, > > Mohammad Ammar Raza > > > > > >
