Greg,
I have upgraded the firmware today morning and here are may observations:
1. the upgrade was done without any single problem
2. the ECD is working fine with the new f/w,
in particular on the video output the black frame is now symmetric and
the picture quality I think is a bit better.
3. the ECD has registered fine after the core re-boot as 'epiphan_agent'
4. BUT, I did try twice the schedule recordings and the agent stays in the
idle state
with the same warning as on the previous f/w
"WARNING : Recording may have failed to start or ingest!
It seems the core system did not recieve proper status updates from the
Capture Agent that should have conducted this recording."
So possible, something need to be modified on the ECD and also on the core?
There are two parameters on the ECD, Matterhorn tab: Agents state push
interval (set to 60s by default), and the Ingest interval (set to blank by
default).
But, I did not have time to test this yet?
Do you have any suggestion what need to be modified?
Thanks,
Leslaw
On 19 October 2011 23:20, Greg Logan <[email protected]> wrote:
> On 11-10-19 02:21 PM, Dr Leslaw Zieleznik wrote:
> >
> > Hi Greg,
> >
> > That's excellent!
> >
> > Can you send us the link for downloading the f/w ?
> > I might try to test it too.
>
> The normal address should work:
> www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php
>
> G
>
> > Thanks,
> > Leslaw
> >
> > On 19 Oct 2011, at 20:35, Greg Logan wrote:
> >
> >> Hi folks,
> >>
> >> Epiphan has just released version 2.2.1 of the firmware for the ECD.
> >> There are numerous changes to the encoding pipeline which should boost
> >> encoding efficiency, as well as fixing some capture state reporting
> issues.
> >>
> >> Please keep in mind that this is a fairly large change, and incorporates
> >> numerous changes from Epiphan that I have not had a chance to look at!
> >> There is no reason it should not work, but these changes may have broken
> >> parts of the integration with Matterhorn so do not be surprised if
> >> things do not work at first. I am going to be testing the new firmware
> >> this afternoon so we should know more soon. If you are willing to help
> >> test then please feel free to upgrade, if not give me a few days to make
> >> sure everything is working 100% and I will let you know on list.
> >>
> >> Thanks,
> >> G
> >>
> >> _______________________________________________
> >> Matterhorn-users mailing list
> >> [email protected]
> >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
> >
> >
> > _______________________________________________
> > Matterhorn-users mailing list
> > [email protected]
> > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
>
>
>
> _______________________________________________
> Matterhorn-users mailing list
> [email protected]
> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
>
>
--
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
