>> There are two parameters on the ECD, Matterhorn tab: Agents state push >> interval (set to 60s by default), and the Ingest interval (set to blank >> by default).
I did play later on with these parameters, changing the Agent State Push Interval down to 10sec or even to 1 sec, also setting the Ingest Interval to 5min and 10min. But, this does not have any positive effect :( Which is a pity, because the output from the device looks much better after the f/w upgrade. Leslaw On 20 Oct 2011, at 20:52, Greg Logan wrote: > On 11-10-20 07:51 AM, Leszek Zieleznik wrote: >> Greg, >> >> I have upgraded the firmware today morning and here are may observations: >> >> 1. the upgrade was done without any single problem >> 2. the ECD is working fine with the new f/w, >> in particular on the video output the black frame is now symmetric >> and the picture quality I think is a bit better. > > Yeah, the uptick in quality is really impressive! The framerates are > also much better. > >> 3. the ECD has registered fine after the core re-boot as 'epiphan_agent' > > I would hope it resets all of the settings to factory defaults, so this > makes sense. I would go so far as to say that any firmware upgrade like > this *requires* a factory reset on your part, just in case. This will > also take care of your blank settings comment below. > >> 4. BUT, I did try twice the schedule recordings and the agent stays in >> the idle state >> with the same warning as on the previous f/w >> >> "WARNING : Recording may have failed to start or ingest! >> It seems the core system did not recieve proper status updates from the >> Capture Agent that should have conducted this recording." > > I've confirmed this locally as well. The recording integration is > completely broken at this point: the program that the scripts used to > call is no longer there, so obviously things don't work :) > > I've sent off an email to Epiphan, hopefully we can get this fixed soon! > > G > >> So possible, something need to be modified on the ECD and also on the core? >> There are two parameters on the ECD, Matterhorn tab: Agents state push >> interval (set to 60s by default), and the Ingest interval (set to blank >> by default). >> But, I did not have time to test this yet? >> >> Do you have any suggestion what need to be modified? >> >> Thanks, >> Leslaw >> >> >> >> On 19 October 2011 23:20, Greg Logan <[email protected] >> <mailto:[email protected]>> wrote: >> >> On 11-10-19 02:21 PM, Dr Leslaw Zieleznik wrote: >>> >>> Hi Greg, >>> >>> That's excellent! >>> >>> Can you send us the link for downloading the f/w ? >>> I might try to test it too. >> >> The normal address should work: >> www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php >> <http://www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php> >> >> G >> >>> Thanks, >>> Leslaw >>> >>> On 19 Oct 2011, at 20:35, Greg Logan wrote: >>> >>>> Hi folks, >>>> >>>> Epiphan has just released version 2.2.1 of the firmware for the ECD. >>>> There are numerous changes to the encoding pipeline which should >> boost >>>> encoding efficiency, as well as fixing some capture state >> reporting issues. >>>> >>>> Please keep in mind that this is a fairly large change, and >> incorporates >>>> numerous changes from Epiphan that I have not had a chance to >> look at! >>>> There is no reason it should not work, but these changes may have >> broken >>>> parts of the integration with Matterhorn so do not be surprised if >>>> things do not work at first. I am going to be testing the new >> firmware >>>> this afternoon so we should know more soon. If you are willing >> to help >>>> test then please feel free to upgrade, if not give me a few days >> to make >>>> sure everything is working 100% and I will let you know on list. >>>> >>>> Thanks, >>>> G >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >> <mailto:[email protected]> >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >> <mailto:[email protected]> >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> <mailto:[email protected]> >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> >> >> -- >> >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users Dr Leslaw Zieleznik OBIS (Oxford Brookes Information Solutions) Oxford Brookes University [email protected] Tel: +44 (0)1865 483973 _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
