Same behavior for us as Benjamin. Micah
On Oct 21, 2011, at 7:55 AM, Benjamin Wulff wrote: > Here are my observations so far: > I updated the firmware. The ECD registered itself with a freshly installed > Matterhorn 1.2. and at least set the state of a scheduled recording to > 'capturing' at the appropriate time > > 14:09:59 INFO (CaptureAgentStateServiceImpl:445) - Recording status changed > to 'capturing', resuming workflow '77' > > Agent state remained 'idle'. Also the recording state remained 'capturing' > after the scheduled end time, nothing has been ingested. > > Regards, > Benjamin > > PS: ECD MH config: Calendar Polling=5 State Push=60 Max.Duration=8 > Ingest Interval=15 > > On 10/20/2011 10:22 PM, Dr Leslaw Zieleznik wrote: >>>> There are two parameters on the ECD, Matterhorn tab: Agents state push >>>> interval (set to 60s by default), and the Ingest interval (set to blank >>>> by default). >> I did play later on with these parameters, changing the >> Agent State Push Interval down to 10sec or even to 1 sec, >> also setting the Ingest Interval to 5min and 10min. >> But, this does not have any positive effect :( >> >> Which is a pity, because the output from the device looks much better after >> the f/w upgrade. >> >> Leslaw >> >> >> >> On 20 Oct 2011, at 20:52, Greg Logan wrote: >> >>> On 11-10-20 07:51 AM, Leszek Zieleznik wrote: >>>> Greg, >>>> >>>> I have upgraded the firmware today morning and here are may observations: >>>> >>>> 1. the upgrade was done without any single problem >>>> 2. the ECD is working fine with the new f/w, >>>> in particular on the video output the black frame is now symmetric >>>> and the picture quality I think is a bit better. >>> Yeah, the uptick in quality is really impressive! The framerates are >>> also much better. >>> >>>> 3. the ECD has registered fine after the core re-boot as 'epiphan_agent' >>> I would hope it resets all of the settings to factory defaults, so this >>> makes sense. I would go so far as to say that any firmware upgrade like >>> this *requires* a factory reset on your part, just in case. This will >>> also take care of your blank settings comment below. >>> >>>> 4. BUT, I did try twice the schedule recordings and the agent stays in >>>> the idle state >>>> with the same warning as on the previous f/w >>>> >>>> "WARNING : Recording may have failed to start or ingest! >>>> It seems the core system did not recieve proper status updates from the >>>> Capture Agent that should have conducted this recording." >>> I've confirmed this locally as well. The recording integration is >>> completely broken at this point: the program that the scripts used to >>> call is no longer there, so obviously things don't work :) >>> >>> I've sent off an email to Epiphan, hopefully we can get this fixed soon! >>> >>> G >>> >>>> So possible, something need to be modified on the ECD and also on the core? >>>> There are two parameters on the ECD, Matterhorn tab: Agents state push >>>> interval (set to 60s by default), and the Ingest interval (set to blank >>>> by default). >>>> But, I did not have time to test this yet? >>>> >>>> Do you have any suggestion what need to be modified? >>>> >>>> Thanks, >>>> Leslaw >>>> >>>> >>>> >>>> On 19 October 2011 23:20, Greg Logan<[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> On 11-10-19 02:21 PM, Dr Leslaw Zieleznik wrote: >>>>> Hi Greg, >>>>> >>>>> That's excellent! >>>>> >>>>> Can you send us the link for downloading the f/w ? >>>>> I might try to test it too. >>>> The normal address should work: >>>> www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php >>>> <http://www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php> >>>> >>>> G >>>> >>>>> Thanks, >>>>> Leslaw >>>>> >>>>> On 19 Oct 2011, at 20:35, Greg Logan wrote: >>>>> >>>>>> Hi folks, >>>>>> >>>>>> Epiphan has just released version 2.2.1 of the firmware for the ECD. >>>>>> There are numerous changes to the encoding pipeline which should >>>> boost >>>>>> encoding efficiency, as well as fixing some capture state >>>> reporting issues. >>>>>> Please keep in mind that this is a fairly large change, and >>>> incorporates >>>>>> numerous changes from Epiphan that I have not had a chance to >>>> look at! >>>>>> There is no reason it should not work, but these changes may have >>>> broken >>>>>> parts of the integration with Matterhorn so do not be surprised if >>>>>> things do not work at first. I am going to be testing the new >>>> firmware >>>>>> this afternoon so we should know more soon. If you are willing >>>> to help >>>>>> test then please feel free to upgrade, if not give me a few days >>>> to make >>>>>> sure everything is working 100% and I will let you know on list. >>>>>> >>>>>> Thanks, >>>>>> G >>>>>> >>>>>> _______________________________________________ >>>>>> Matterhorn-users mailing list >>>>>> [email protected] >>>> <mailto:[email protected]> >>>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>>> >>>>> _______________________________________________ >>>>> Matterhorn-users mailing list >>>>> [email protected] >>>> <mailto:[email protected]> >>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>> >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> <mailto:[email protected]> >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> Dr Leslaw Zieleznik >> OBIS (Oxford Brookes Information Solutions) >> Oxford Brookes University >> [email protected] >> Tel: +44 (0)1865 483973 >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> > > > -- > Benjamin Wulff > > Universität Osnabrück > Zentrum für Informationsmanagement > und virtuelle Lehre (virtUOS) > Raum 42/205, Heger-Tor-Wall 12, D-49074 Osnabrück > > Telefon: (05 41) 969-6530 > E-Mail: [email protected] > URL: http://www.virtuos.uni-osnabrueck.de > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
