Trying to find out why I'm still getting the test image from a epiphan vga2usb LR (throughout the entire recording), I'm using a gstreamer test line...
$ sudo gst-launch --gst-debug=2 v4lsrc device=/dev/vga2usb0 ! fakesink Setting pipeline to PAUSED ... 0:00:00.023765282 8239 0x20df080 WARN v4l v4l_calls.c:89:gst_v4l_get_capabilities:<v4lsrc0> error: error getting capabilities Invalid argument of from device /dev/vga2usb0 ERROR: Pipeline doesn't want to pause. ERROR: from element /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: Could not get/set settings from/on resource. Additional debug info: v4l_calls.c(89): gst_v4l_get_capabilities (): /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: error getting capabilities Invalid argument of from device /dev/vga2usb0 Setting pipeline to NULL ... Freeing pipeline ... ... that's it. I've been googling for a couple hours now, but I don't seem to find anything applicable to my situation. The Epiphan driver version is 3.26.0.26, by the way. -- Frank Van Damme No part of this copyright message may be reproduced, read or seen, dead or alive or by any means, including but not limited to telepathy without the benevolence of the author. _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
