OK, then. Is there any video feed attached to the card? Please note that the pipeline (and most calls to the device whatsoever) will fail if no signal is received.
Good luck Rubén 2012/2/22 Frank Van Damme <[email protected]> > On 22-02-12 12:50, Rubén Pérez wrote: > >> Hey, Frank, >> >> Please use the following. Note that the only difference is using v4l2src >> instead of v4lsrc. From a certain driver version, the epiphan cards don't >> support v4l (version 1), but v4l2 instead. >> >> sudo gst-launch --gst-debug-no-color -e --gst-debug=2 v4l2src >> device=/dev/vga2usb ! fakesink >> > > No, "it isn't a v4l2 driver". Neither is vga2usb0, btw. > > > > > -- > No part of this copyright message may be reproduced, read or seen, > dead or alive or by any means, including but not limited to telepathy > without the benevolence of the author. > ______________________________**_________________ > Matterhorn-users mailing list > Matterhorn-users@**opencastproject.org<[email protected]> > http://lists.opencastproject.**org/mailman/listinfo/**matterhorn-users<http://lists.opencastproject.org/mailman/listinfo/matterhorn-users> >
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
