Well, I did forgot to mention that you needed to 'make unload' and 'make load' the driver to see if it works. I don't know if that was the cause...
Our experience is that, no matter how tricky the driver installation can be, once installed it works as expected. If you keep experiencing those weird problems, please let us know. Best regards On 23 Feb, 2012 16:17, "Frank Van Damme" <[email protected]> wrote: > 2012/2/22 Rubén Pérez <[email protected]>: > > Let's see... How did you install the capture agent? Did you use the > official > > scripts? > > > > If you didn't, did you modify the "Makefile"? If you didn't, you need to > > look for the section "load" and modify the line starting by "insmod", > adding > > the following "v4l_num_buffers=2". > > > > If this does not work, I must confess I don't know what else it can be... > > Well, even that didn't solve the problem. Powering off the machine and > un/re-plugging the device did, in the end. I'm getting an image out of > it again, now. Seems as if either the driver of the device isn't as > 100% stable/trustworthy as we 'd like. > > -- > Frank Van Damme > No part of this copyright message may be reproduced, read or seen, > dead or alive or by any means, including but not limited to telepathy > without the benevolence of the author. > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
