I just had the same issue a few days back they are all sorted now thanks to Greg's advice.
Have you used this tool to find it : http://www.epiphan.com/products/vga2ethernet/NetworkDiscovery.exe The Epiphan page only has basic info : http://www.epiphan.com/products/other-applications/matterhorn/ Might be worth having a look at a talk given by Greg at the Unconference 2012. http://tv.teltek.es/en/iframe/25.html Hope that helps. I'm a "newbie" too... All the best. Kirk Rutter Learning Technology Support London College of Fashion University of the Arts London 182 Mare Street London, E8 3RE ': +44 (0)207 514 8681 ------------------------------ Mobex - 3576 - 07894 392822 www.fashion.arts.ac.uk <http://www.fashion.arts.ac.uk/> www.learningtechnologysupport.com<http://www.learningtechnologysupport.com/> ________________________________ From: [email protected] [[email protected]] On Behalf Of Tilo Westermann [[email protected]] Sent: 13 April 2012 17:08 To: [email protected] Subject: [Matterhorn-users] Matterhorn Capture Device - Setup Dear Matterhorn users, we recently bought an Epiphan Matterhorn Capture Device and we would love to do the setup and get it running. However, we did not find any documentation on how to do this for this device. In order to just test the webinterface, we connected it to a PoE injector and a switch. A pc was connected to the switch as well. Unfortunately, we could not reach the webinterface using http://my_ecd/admin. Any advice on how to do the very basic setup is appreciated. Best wishes, Tilo
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
