Actually it is just connected to a switch and the only other endpoint is the pc. So whitelisting should not be necessary. Regarding the LEDs: The network port shows two bright LEDs (green+orange). On the other (IN-)side, only the middle LED (green) lights up.
On Apr 16, 2012, at 6:20 PM, Greg Logan wrote: > On 12-04-16 10:13 AM, Tilo Westermann wrote: >> I tried various IP scanners and additionally tried using a crossover >> cable - still without success. >> I got the MAC address from Epiphan - but that doesn't help without >> seeing it on the network, right? >> >> Any further comments are welcome. > > The network discovery tool should work if the device is hooked up such > that it should end up on the same subnet as the machine doing the > scanning. Are there two lights lit on the device (red and green)? > > At our institution we have to whitelist MACs connecting to the wired > network. Before I whitelist a device it doesn't show up in the scan > because it's on a completely different network. Is your institute the same? > > G > >> On Apr 16, 2012, at 11:46 AM, Dr Leslaw Zieleznik wrote: >> >>> >>> 1. Your network guys should have a suitable tool. >>> >>> 2. I am using without any problem the Phihong POE20V-560G (Output >>> 56V-0.35A), >>> yours I think should be also fine. >>> >>> Best wishes, >>> Leslaw >>> >>> On Apr 16, 2012, at 10:27 AM, Tilo Westermann wrote: >>> >>>> I just downloaded the NetworkDiscovery tool, unfortunately it doesn't >>>> show any devices. I requested the MAC address from Epiphan, but this >>>> may take a while. >>>> >>>> For power supply, I'm using a Intellinet PoE injector (Model 524179 - >>>> found >>>> here: >>>> http://www.intellinet-network.com/en-US/products/6897-power-over-ethernet-poe-injektor). >>>> Are there any known issues regarding this injector? >>>> >>>> Best regards, >>>> Tilo >>>> >>>> On Apr 13, 2012, at 6:45 PM, Kirk Rutter wrote: >>>> >>>>> You're welcome. >>>>> >>>>> You can also upgrade the firmware to the latest (stable) version >>>>> using the >>>>> link below, once you login to the device. >>>>> >>>>> http://aries.usask.ca/epiphan/frm-2-3-0e-Matterhorn-16051_1068-VGA2CPU_DM365.bfrm-CUSTOM.bfrm >>>>> >>>>> >>>>> >>>>> ** Regards. >>>>> >>>>> ** >>>>> >>>>> *Kirk Rutter* >>>>> >>>>> >>>>> >>>>> >>>>> Learning Technology Support >>>>> London College of Fashion >>>>> University of the Arts London >>>>> 182 Mare Street >>>>> London, E8 3RE >>>>> >>>>> ': +44 (0)207 514 8681 >>>>> ------------------------------ >>>>> Mobex -3576 - 07894 392822 >>>>> >>>>> ** >>>>> >>>>> *www.fashion.arts.ac.uk <http://www.fashion.arts.ac.uk/>* >>>>> >>>>> www.learningtechnologysupport.com >>>>> <http://www.learningtechnologysupport.com/>** >>>>> >>>>> ** >>>>> >>>>> >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> *From:* [email protected] >>>>> <mailto:[email protected]> >>>>> [[email protected] >>>>> <mailto:[email protected]>] On Behalf Of >>>>> Tilo Westermann [[email protected] >>>>> <mailto:[email protected]>] >>>>> *Sent:* 13 April 2012 17:36 >>>>> *To:* Matterhorn Users >>>>> *Subject:* Re: [Matterhorn-users] Matterhorn Capture Device - Setup >>>>> >>>>> Thanks for the quick reply! I used a Mac, but didn't even know there >>>>> is a tool for discovering the device. I'll try it on Monday using a >>>>> regular Windows machine. >>>>> >>>>> Have a nice weekend! >>>>> - Tilo >>>>> >>>>> >>>>> On 13.04.2012, at 18:28, Kirk Rutter <[email protected] >>>>> <mailto:[email protected]>> wrote: >>>>> >>>>>> I just had the same issue a few days back they are all sorted now >>>>>> thanks to Greg's advice. >>>>>> >>>>>> Have you used this tool to find it : >>>>>> http://www.epiphan.com/products/vga2ethernet/NetworkDiscovery.exe >>>>>> >>>>>> The Epiphan page only has basic info : >>>>>> http://www.epiphan.com/products/other-applications/matterhorn/ >>>>>> >>>>>> Might be worth having a look at a talk given by Greg at the >>>>>> Unconference 2012. >>>>>> >>>>>> http://tv.teltek.es/en/iframe/25.html >>>>>> >>>>>> Hope that helps. I'm a "newbie" too... >>>>>> >>>>>> All the best. >>>>>> >>>>>> >>>>>> ** >>>>>> >>>>>> *Kirk Rutter* >>>>>> >>>>>> >>>>>> Learning Technology Support >>>>>> London College of Fashion >>>>>> University of the Arts London >>>>>> 182 Mare Street >>>>>> London, E8 3RE >>>>>> >>>>>> ': +44 (0)207 514 8681 >>>>>> ------------------------------ >>>>>> Mobex -3576 - 07894 392822 >>>>>> >>>>>> ** >>>>>> >>>>>> *www.fashion.arts.ac.uk <http://www.fashion.arts.ac.uk/>* >>>>>> >>>>>> www.learningtechnologysupport.com >>>>>> <http://www.learningtechnologysupport.com/>** >>>>>> >>>>>> ** >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------ >>>>>> *From:* [email protected] >>>>>> <mailto:[email protected]> >>>>>> [[email protected] >>>>>> <mailto:[email protected]>] On Behalf Of >>>>>> Tilo Westermann [[email protected] >>>>>> <mailto:[email protected]>] >>>>>> *Sent:* 13 April 2012 17:08 >>>>>> *To:* [email protected] >>>>>> <mailto:[email protected]> >>>>>> *Subject:* [Matterhorn-users] Matterhorn Capture Device - Setup >>>>>> >>>>>> Dear Matterhorn users, >>>>>> >>>>>> we recently bought an Epiphan Matterhorn Capture Device and we >>>>>> would love to do the setup and get it running. However, we did not >>>>>> find any documentation on how to do this for this device. >>>>>> In order to just test the webinterface, we connected it to a PoE >>>>>> injector and a switch. A pc was connected to the switch as well. >>>>>> Unfortunately, we could not reach the webinterface >>>>>> using http://my_ecd/admin. >>>>>> >>>>>> Any advice on how to do the very basic setup is appreciated. >>>>>> >>>>>> Best wishes, >>>>>> Tilo >>>>>> _______________________________________________ >>>>>> Matterhorn-users mailing list >>>>>> [email protected] >>>>>> <mailto:[email protected]> >>>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>>> _______________________________________________ >>>>> Matterhorn-users mailing list >>>>> [email protected] >>>>> <mailto:[email protected]> >>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> <mailto:[email protected]> >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> ====================== >>> Dr Leslaw Zieleznik >>> OBIS (Oxford Brookes Information Solutions) >>> Oxford Brookes University >>> Headington >>> Oxford OX3 0BP >>> ______________________ >>> [email protected] <mailto:[email protected]> >>> Tel: +44 (0)1865 483973 >>> Fax: +44 (0)1865 483073 >>> ====================== >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >>> <mailto:[email protected]> >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
