Ah, you have the firmware with the error in it :) Please reflash the device using the firmware at http://aries.usask.ca/epiphan/frm-2-3-0e-Matterhorn-16051_1068-VGA2CPU_DM365.bfrm-CUSTOM.bfrm. You should reset the device to defaults after flashing, and then (once you've redone your settings) everything should work as expected!
G On 4/19/2012 9:32 PM, zengshan wrote: > the device logs link on the left hand side of the GUI,it shows that : > Apr 20 11:26:17 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162023135381, audio time is 162023066667 > Apr 20 11:26:55 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162061237093, audio time is 162061166667 > Apr 20 11:27:04 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:27:33 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162099569509, audio time is 162099500000 > Apr 20 11:28:05 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:28:11 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162137900247, audio time is 162137833333 > Apr 20 11:28:50 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162177002837, audio time is 162176933333 > Apr 20 11:29:07 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:29:07 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:29:10 MTH92512 user.info MH.sendCaps: Capabilities sent to > /capture-admin/agents//configuration > Apr 20 11:29:29 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162215101791, audio time is 162215033333 > Apr 20 11:30:07 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162253436480, audio time is 162253366667 > Apr 20 11:30:11 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:30:45 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162291769028, audio time is 162291700000 > Apr 20 11:31:12 MTH92512 user.info MH.sendState: Agent set to idle at > /capture-admin/agents/ > Apr 20 11:31:24 MTH92512 user.warn ffsource: Audio is late, adding 3 > frames, time is 162330103577, audio time is 162330033333 > Apr 20 11:31:44 MTH92512 user.debug MH.Scheduler[900]: Fetching calendar > from /recordings/calendars?agentid=&cutoff=1336102304000 > > 2012-04-20 > ------------------------------------------------------------------------ > ZENG SHAN > Tel,861088236837 > E-mail,[email protected] > Computing Center > Institute of High Energy Physics,CAS > ------------------------------------------------------------------------ > *发件人：*zengshan > *发送时间：*2012-04-20 11:25 > *主题：*[Matterhorn-users] 回复: Re: problems in using MCD > *收件人：*"Matterhorn Users"<[email protected]> > *抄送：* > > yes, the url in Matterhorn configuration section includes the correct > port(which is 8080 by default), but I didn't > see capture agent in the admin UI on the core, and I went to the > device logs link on the left hand side of the GUI, but it shows that : > > > This log screen is somewhat expensive to run, idling on this > screen during production is not recommended > > Settings Tailing file: /var/log/messages | Grep keyword: "" | Inverted: > false > 2012-04-20 > ------------------------------------------------------------------------ > ZENG SHAN > Tel,861088236837 > E-mail,[email protected] > Computing Center > Institute of High Energy Physics,CAS > ------------------------------------------------------------------------ > *发件人：*Greg Logan > *发送时间：*2012-04-20 11:18 > *主题：*Re: [Matterhorn-users] problems in using MCD > *收件人：*"matterhorn-users"<[email protected]> > *抄送：* > > On 4/19/2012 7:03 PM, zengshan wrote: >> hi， >> I am now using MCD to capture video, audio and VGA signals, and already >> set the matterhorn core server url in Matterhorn configuration section >> (see the image attached), but the matterhorn core server didn't receive >> any information from MCD from the log files. Is there anything wrong? or >> should I do other configuration? > > I'm going to assume that the username and password are correct. Does > the URL have the correct port? Does the device show up as a capture > agent in the admin UI on the core? The agent does not send its logs to > the core. You can view the ECD's logs from the device itself using the > 'Device Logs' link on the left hand side of the GUI. Copy a snippet of > the logs and send it to list and we'll be able to sort out your issue. > > G > >> 2012-04-20 >> ------------------------------------------------------------------------ >> ZENG SHAN >> Tel,861088236837 >> E-mail,[email protected] >> Computing Center >> Institute of High Energy Physics,CAS >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
