On Mon, 2010-07-12 at 17:05 +0300, Ameya Palande wrote: > Hi Vijay, > > On Mon, 2010-07-12 at 09:05 +0200, ext vijay singh wrote: > > I have tried image from below location for DevKit8000: > > > > //http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Make_X_start > > > > but i couldn't able to boot kernel. > > Can you post the kernel output from serial console and the .config file > that you used for building this kernel?
I have used kernel image from below location : //http://wiki.meego.com/ARM/Meego_on_the_Beagle Check for section "Steps to modify an N900 image for BeagleBoard " Serial console O/P : ******************************************************************* Texas Instruments X-Loader 1.41 Starting OS Bootloader... U-Boot 1.3.3-svn333 (Sep 10 2009 - 16:49:01) OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 DevKit8000 Board + LPDDR/NAND DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 OMAP3 DevKit8000 # setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p3 rootdelay=1' OMAP3 DevKit8000 # mmcinit OMAP3 DevKit8000 # fatload mmc 0 82000000 uImage reading uImage 1986880 bytes read OMAP3 DevKit8000 # bootm 82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-2.6.34-beagle Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1986816 Bytes = 1.9 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ******************************************************************* After that nothing will happen. Please let me know boot arg are correct ?? or Do i have to use other configuration. If you have working configuration then please send it to me. Regards, vij > > Cheers, > Ameya. > > _______________________________________________ > MeeGo-dev mailing list > [email protected] > http://lists.meego.com/listinfo/meego-dev _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
